Customized Constant Temperature Walk-In Chamber Room For Stability Test
What's your condition:
The size of your installment place:_______________________(W*H*D)M
The longth of your requested cable wire:________________M
Your power voltage:____________________V
Your testing samples:_______________________________________________________
The Calorific value of your testing samples:_________________________________J
Thank you!
Optional accessories
Cable Port: Two size of cable port is available: Φ50mm, Φ100mm.
Double door
Pass room: Provided to avoid disturbance of atmospheric temperature and humidity while opening the door.
Floor reinforcement: Can be fixed if heavy specimen placed in the chamber for test.
Carry-in inclined platform: Provided below the door to facilitate moving of specimens in and out through the door.
Entire ceiling blow-out duct
The extremely wide air inlet reduces the airflow rate (down to apprrox.0.5m/s)
Dehumidifier
The rotation regenerating dehumidifier (M-300)ensures precise control of low humidity (21 ºC,23%RH)for electrostatic reliability tests.
Temperature and humidity recorder
100mm width recording paper with 6 dots
180mm width recording paper with 12 dots
Status indication lamp
Provide to signal chamber status and warnings when normal running, a malfunction running or stand by occurs.
Water purifier
Provided to keep the humidifier heater free from scale and ensure the supply of water to humidifier.
Power socket
Air cooled type condense
Main parts brand: Tecumseh, Danfoss, , ALCO, AC&R, ESK, RANCO, SAGINOMIYA, Castel, etc.
Your company has just developed a great new product,
and now it is your job to select an environmental test
chamber to test it and make sure it will hold up.
Komeg has business on reliability test equipment for more than 20years.
KOMEG is widely recognized and commended bu the top 500comopanies and also customers from electronic, computer, home appliance, communications, chemical industry and scientific reseach.
In 2003, Komeg did the reseach and development of the main equipment with the Pecking University for state key laboratory of environment and pollution simulation(located in Shenzhen HIgh-Tech Park, and funded by national natural science foundation.) After-sale service
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.
