Temperature Controller Climatic Test Chamber For Electronics Products Testing
1. Features
※ Use all the company brand KM-5166 LCD touch screen controller, with PID control parameter settings
※ Flexible data collection and recording method
Temperature and humidity settings (SV) Actual (PV) values can be displayed directly,
The execution of the program can display numbers, paragraphs, remaining time and cycles, run time display,
Program editing and graphics curve display,
Fixed or program running status display,
10 inch TFT display.
2. High temperature limits of test chambers
There are many types of test rooms, but they all have high and low temperature limits. Let's take a look at the typical high temperature thresholds and why they exist.
The test chamber typically has a wire heater made of a material called Nichrome. By placing a continuous heating bead, a greater amount of heat is produced. The result looks like a toaster inside. The fan circulates the air through the heater, so the indoor sample is not exposed to radiant heat. It is very easy to add a heater and increase the speed and / or upper limit of the chamber.
The KOMEG chamber typically has a high temperature limit below 200 ° C. This is why a room of high temperature restrictions exist in the decomposition:
3. Standard Met and Implemented
GB/Bb T2423.2-89 high temperature test method
GB2423.1-89 test A: low temperature test method
GJB150.4-1986 test at low temperature
IEC60068-2-1 low temperature test method
IEC60068-2-38 temperature cycle
IEC60068-2-78 constant humidity temperature
MIL - STD - 202G - 103B humidity test
IEC60068-2-30 humidity temperature cycle
GB/T2423.3 constant humidity heat test method
4. Temperature Humidity Test Chamber Parameter Specifications
The specifications is measured in the environment of + 25 ℃, temperature and humidity performance measurement comply with related regulation of IEC60068-3 standard; Sensors placed in the air outlet.
| Model |
KMH |
| Temp. range |
-40°C ～150°C |
| Display resolution |
0.1°C |
| Temperature stability |
High±0.5°C ,low ±1.0°C |
| Temperature uniformity |
±2.0°C |
| Heat up time |
-40°C ～+100°C,within 45 min |
| Pull down time |
+20°C ～-40°C,within 60 min |
| Interior material |
Stainless Steel Plate ( SUS 304) |
| Exterior material |
Baked Painting Steel Or Stainless steel ( SUS304) |
| Insulation material |
Rigid polyurethane Foam and Glass Fiber Wool |
| Total power |
7KW(heater 3KW included) |
| Max current |
13.6A |
| Ambient Temp. |
+5°C ～+35°C |
| Power Supply |
|
AC 380V±10％ 50Hz ,3 phase 4 wires +Ground Wires |
| Weight |
420KG |
| Sight window size |
370 X 450mm |
| Sample holder |
2 pcs |
| Fittings |
cable port(portΦ50mm)*1, chamber lamp*1, power cable *2m |
| Safety device (standard) |
No fuse breaker,over pressure,over heat&over current protect,over temp.
protect, over load protect for blower, dry heat protect
|
| Control System |
Balanced Temperature & Humidity Control (BTHC)System |
| Refrigeration system |
Air Cooled (Water Cooled is option) |
| Hermetic compressor |
|
Single stage refrigeration system,
CFC-Free refrigerant(HFC-507/HFC-23)
|
| Controller |
7-inch LCD Touch Screen panel |
| Operation model :Program or fix point running |
| Memory capacity :120programs,1200steps, |
| All repeat 999 cycles, part repeat 99 cycles |
|
Note: 1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available
|
5. Advantages --- Why KOMEG IS Your Right Choice?
You can get more from other suppliers.
1 exquisite touch and excellent user experience
2. Large glass window design, omnidirectional viewing angle, hollow plating film and anti-condensation design; Built-in LED light, easy to test the process of real-time observation of the state; two-door design, the internal glass door with access hole, easy operation.
3. Inner box material for the SUS304 # installation of stainless steel imports, the outer box for the steel, paint the application of automotive coating technology. Box with triumph processing machine forming, beautiful appearance.
4. Large-size full-color LCD touch screen display, easy to operate, easy to edit the program. PID has automatic calculation function; self-diagnosis function, step by step display failure message and fault shooting solution.
5. An RS-232 and RS-485 communication interface, supporting the recorder, scalability. We also support PC via wifi or line for remote control (recommended).
6. Packaging
The programmable climate chamber is covered with a bubble film before it is placed in a strong plywood shell. It not only has good shock absorption, impact resistance, heat sealability, but also has the advantages of non-toxic, odorless, moisture-proof and anti-collision. The
Product Tags:
|
|
Temperature Controller Climatic Test Chamber For Electronics Products Testing Images
|
