Application
It is suitable for tests the products of electrical, electronic, mechanical and other products, parts and materials under the conditions of high and low temperature and high temperature and humidity. For quality and reliability test of simulating temperature and humidity changes in electrical, electronic, mechanical and other products, parts and materials.
Features
● GB-2423.1-2008 (IEC68-2-1)Test A: Low Temperature Test
● GB-2423.2-2008(IEC68-2-2)Test B: High Temperature Test
● GJB360.8-2009(MIL-STD.202F) High Temperature Life Test
● GJBl50.3-2009(MIL-STD-810D) High Temperature Test
● GJBl50.4-2009 (MIL-STD-810D) Low Temperature Test
● GB2423.3-2008(IEC68-2-3)Test Ca: Constant Heat Test
● GB2423.4-2008(IEC68-2—30) Test Db: Damp Heat Alternative Test
● GJBl50.9-2009 (MIL-STD-810D) Damp Heat Test
| 1．Energy conservation | Bypass mode to adjust cooling capacity to achieve a constant temperature and humidity effectively |
| 2．Easy Operation | ※Using company owned brand KOMEG KM-5166 LCD touch screen controller with PID control parameters setting ※Flexible approach for data collection and recording |
| 3．High reliability | ※Key parts are imported, ensuring the service life and high reliability ※Efficient oil separator to ensure the service life of the compressor |
| Ⅳ. (Air cooled, room temperature +25℃, no load ) |
| 1. Temperature |
| 1.1 Temperature range | -20℃ ～ +150℃ |
| 1.2 Temp Deviation | ≦ ± 2.0℃ |
| 1.3 Temp Fluctuation | ±0.5℃ |
| 1.4 Temp Uniformity | ±2.0℃ |
| 1.5 Ramping and soaking rate | Heating up rate: -20℃↑ +100℃ about 35min (no-load, ambient temperature +25℃) Cooling rate: 20 ℃to -20℃ about 45min (no-load, ambient temperature +25℃) |
| 2. Humidity |
| 2.1 Humidity range | 20%R.H～98%R.H |
| 3.2 Control range | |
| 3.3 Humidity deviation | ±3.0％RH(＞75％RH) ±5.0％RH(≤75％RH) |
| 3.4 Humidity uniformity | 3.0％RH (no-load) |
| 3.5 Humidity fluctuation | ±2.0％RH |
| Temperature and humidity performance test is in accordance with the relevant provisions of the IEC60068 -3 standard measurement; sensor placed in the unit outlet. |
Photos show
